Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
14.1
Preparation
Check delivery content
Check the delivery immediately for transport damage and missing parts. Report any damage or
missing parts to your dealer or the shipping company immediately. Visible transport damage must
also be noted immediately on the delivery note in accordance with the provisions of the warranty,
otherwise the goods are deemed to have been properly accepted.
Requirements for the installation site
The selected installation site must ensure a suitable connection to the electrical mains, as well as
(e.g.:) connection to an extraction system. Observe the safety requirements and the dimensions of
the machine.
Place the machine on a level, solid surface. The chosen installation site of the machine must
comply with the local safety regulations as well as the ergonomic requirements for a workplace
with sufficient lighting conditions.
The floor at the installation site must be able to bear the load of the machine!
When dimensioning the required space, take into account that the operation, maintenance and
repair of the machine must be possible without restrictions at all times. In the case of long
workpieces, no crushing or shearing points may occur in the extension area (=danger area).
Preparation of the surfaces
Before putting the machine into operation, carefully remove the anti-corrosion protection or
grease residues from the bare metal parts. This can be done with the usual solvents. Under no
circumstances should you use nitro thinners or other cleaning agents, as these can attack the
machine´s finish.
The use of paint thinners, petro, aggressive chemicals or scouring agents will damage
the surfaces!
Therefore: Use only mild cleaning agents!
14.2
Assemble
The machine and machine components are heavy!
2 persons are required to assemble the machine.
The machine has been disassembled for transport and must be reassembled before use. Follow
the instructions below:
HOLZMANN Maschinen GmbH
www.holzmann-maschinen.at
NOTE
NOTE
NOTE
ASSEMBLY
31
STM26 | STM26S
Publicidad
