HOLZMANN MASCHINEN STM26 Instrucciones De Servicio página 38

16.3 Storage
Store the machine in a dry, frost-proof and lockable place when not in use. Make sure that
unauthorised persons and especially children do not have access to the machine.
Improper storage can damage and destroy important components. Only store packed
or already unpacked parts under the intended ambient conditions!
16.4 Disposal
Observe the national waste disposal regulations. Never dispose of the
machine, machine components or operating equipment in the residual waste.
If necessary, contact your local authorities for information regarding available
disposal options.
If you purchase a new machine or equivalent equipment from your specialist
dealer, he is obliged in certain countries to dispose of your old machine
properly.
TROUBLESHOOTING
Danger due to electrical voltage!
Handling the machine with connected power supply may result in serious injury or
death.
 Always disconnect the machine from the power supply before maintenance or
repair work and secure it against unintentional reconnection.
Many possible sources of error can be eliminated in advance if the machine is properly connected
to the mains.
If you are unable to carry out the necessary repairs properly and/or do not have the required
training, always consult a specialist to solve the problem.
Trouble
Motor does not
run
Tool smokes
Inaccurate result
HOLZMANN Maschinen GmbH
Possible cause
Power supply incorrect
Switch defective
Motor defective
Wrong ratio speed /
material hardness
Blunt mortise drill
Poor workpiece clamping
Vibratin of the machine
www.holzmann-maschinen.at
NOTE
WARNING
Check all electrical connections
Repair/exchange switch
Repair/exchange switch
Reduce pressure
Sharpen the mortise drill
Readjust and clamp the workpiece
new
Relevel the machine
TROUBLESHOOTING
Solution
STM26 | STM26S
38