Publicidad
Idiomas disponibles
Idiomas disponibles
DISPOSAL OF WASTE APPLIANCES
At the end of its service life, this product must not be disposed of with mixed
household waste; return it to a collector/recycler of waste electrical and electronic
equipment. This is shown by the symbol placed on the product, the user manual
or the packaging. The materials used in the appliance can be reused according to
their classification identifications. By reuse, recycling or applying other forms of
use of waste appliances, you make a significant contribution to the protection of
our environment.
Local administration will provide you with the information about the nearest
disposal locations for the appliance.
3.6. Troubleshooting
Problem
The
product
wobbly or tilting.
The
handlebar
rattling.
The product makes
unusual noise.
No resistance during
the training.
Possible cause
is
1. Uneven surface.
2. The support legs are
incorrectly installed.
is
The
bolts between
handlebar and the post/tube
became loose over time or
have not been tightened
well.
The bolts are overtightened.
1. Flywheel failure.
2. Resistance setting dial
failure.
3. The drive belt slipped and
dropped.
4. Failed bearing.
Remedy
1. Move the bike to a level
surface.
2. Retighten or reinstall the
support legs properly.
the
Retighten the bolts.
Release the bolts a bit.
1. Inspect and replace.
2. Inspect and replace.
3. Inspect and replace.
4. Inspect and replace.
Publicidad
