Daewoo DCS6524 Manual Del Usuario página 12

5. ENGINE START
1. Fill fuel and chain oil tanks and retighten plugs.
(1) Chain oil
(2) Fuel
2. Place the switch in position I (on position)
3. Pull the choke button out.
NOTE: On models with a primer bubble, you have to press 5 times before starting
the starting process, to facilitate the delivery of fuel to the carburetor.
Pull the starter rope until you feel the machine make a sound identifiable as a
small start attempt. At this point, the choke must be returned to the initial position (all the way in). In
the event that you had not noticed that first gesture or attempted
start and had already pulled the rope 4 or 5 times, it is essential that you also insert
the choke inwards, otherwise the machine will drown and will not start.
At this point, we will simply pull the rope until the machine starts. When the gas nailer is activated,
the machine will start accelerated and simply by activating the accelerator, it will automatically
unlock.
- DROWNED ENGINE
In the event that we have drowned the machine or it does not start and we want to rule out that it is,
we will follow the following steps:
- We will raise the switch to position I and we will make sure that the throttle is fully
12