Johnson JFF7660 Manual De Usuario página 29

4) Dismantle the bottom hinge, hale caps and screws, lnstall the bottom hinge shaft and adjust foot
on other side of the bottom hinge, then inslall !he hinge on the other side.
5) Dismantle !he screw, sleeve pipe and stopper from !he refrigerating door and freezer door, and the
support on !he lower cover of !he refrigerating door is also removed.Then install lhem on !he other side
of the doors in arder. Exchange the position of sleeve pipe and hale cap at the top cover of
refrigerating door, and install the upper hinge sleeve on the freezer door to the hale on the other
side of axis sleeve.
6) Pul !he cold door on the lower hinge , install the middle hinge, cover, screw and screw cap .
A
CThe picture above is only far reference. The actual configuration will depend on
!he physical product or statement by the distributor)
hale
9
screwcap
sleeve pipe
stopper
support
screw
V.1