Amsta AMCG90BM Manual De Instrucciones página 30

• As the sides of the product will get hot when operation, do not place
inflammable substances nearby.
• Do not put the baking trays, plates or aluminum folio directly on the base of the
oven. Accumulated temperature may give damage to the base of the oven.
• All around the ventilation channels should be kept unobstructed.
• Product may be hot during use. Do not touch the hot parts, inside of the oven
and heating components, etc.
• When placing food inside and taking it out of hot oven, always use heat-resistant
oven gloves.
• Do not use the product when front glass door removed or broken.
• When the oven operates, its rear surface may also get hot. Power connections
should not come into contact with the rear surface; otherwise, connections may
be damaged.
• Do not compress the connection cables to the door of the oven and do not pass
them over hot services. Melting of the cable may cause short circuit and this
cause fire.
• Make sure the product is switched-off after each use.
• The product and accessible parts of the product are hot when operating.
• Do not touch the product while operating.
• Do not use sharp and piercing materials to clean the inside and glass of the
product; such materials may give damage to your product.
• As hot oil may cause fire, always be careful and attend the product when it
operates.
• Do not attempt to extinguish fire by use of water; immediately disconnect
power of the product and close the burning part by help of a wet blanket.
• Do not keep any flammable or combustible substance in the product.
• Do not use steam cleaner.
• Do not use aggressive cleaning materials or sharp metal scrapers to clean the
oven door (door) that may destroy the surface and cause break of the glass.
• CAUTION: Prior to replacement of the oven lamp, disconnect the power and
allow it to cool down to eliminate risk of electric shock.
• 1st shelf of the oven is the lowest shelf.
• Do not use the product or nylon, flammable and heat-sensitive materials.
8