Horizon Fitness 7.4 AT Manual Del Propietário página 11

ASSEMBLY STEP 1
HARDWARE FOR STEP 1
PART TYPE
A UPRIGHT GUIDE BOLT
B MAST BOLT
C FLAT WASHER
D SPRING WASHER
2
4
1
A
3
C
D
B
DESCRIPTION QTY
M8X1.25PX11L 2
M8X1.25PX80L 8
8.4X15.5X1.6T
8
8.2X15.4X2.0T
8
7
4
B
D
C
A
1.1 Open HARDWARE FOR STEP 1.
1.2 Insert UPRIGHT GUIDE BOLT (A) into MAIN FRAME
BRACKET (1) and fully tighten.
NOTE: Do not fully tighten the following bolts until the
end of ASSEMBLY STEP 4.
1.3 Attach LEAD WIRE to bottom end of CONSOLE
CABLE (2). Pull LEAD WIRE through RIGHT
CONSOLE MAST (4). After pulling the wire through
the mast, the top of the CONSOLE CABLE (2) should
be located at the ATTACHMENT BRACKET (7).
1.4 Attach RIGHT CONSOLE MAST (4) to MAIN
FRAME (3) using 4 BOLTS (B), 4 FLAT WASHERS (C)
AND 4 SPRING WASHERS (D). Feed the extra console
cable back into the upright mast.
NOTE: Be careful not to pinch the console cable
while attaching the right console mast.
1.5 Repeat STEP 1.4 on the LEFT SIDE.
A C
B D
11