ProBreeze PB-AC03 Manual De Instrucciones página 8

EMPTYING THE WATER TANK
Due to the large capacity of the water tank it
is recommended to run the appliance until the
water level is at the min line prior to emptying
the water tank.
Once the water level is at the min line, to
empty the water tank:
1. Turn off the appliance and unplug it from
the power socket.
2. Place a shallow tray underneath the water
outlet.
3. Remove the water tank plug clip and the
water tank plug and allow the water to
collect in the shallow tray.
4. To fully empty the water tank gently tilt
the appliance back on its rear wheels. Do
not tilt more than 30 degrees.
5. Once empty, return the appliance to a
fully upright position and replace the
water tank plug and water tank plug clip.
6. Empty the shallow tray.
7. Remove the filter casing from the rear of
the appliance to gain easy access to the
water tank.
8. Dry the water tank using a soft cloth.
9. Return the filter casing to the rear of the
appliance.
Notes:
• If the shallow tray is not large enough to
hold all of the water from the appliance,
replace the water tank plug and water
tank plug clip to prevent water flowing
onto the floor. Empty the shallow tray and
continue from step 2.
• If the water tank level is above the min
line and no time is available to run the
appliance so that the water level reaches
the min line prior to emptying the water
tank, it is recommended to partially empty
the water tank using a small jug until the
water level reaches the min line. To gain
easy access to the water tank so that a
small jug may be used, remove the filter
casing from the rear of the appliance.
Alternatively, if you have access to a
8 | English
drainage point the water tank can be
emptied directly over the drainage point.
2 & 3.
4.