Beurer BM 05 Modo De Empleo página 26

9. How to measure
A. Inserting batteries in position:
a Open battery cover.
b Refer to the picture in positioning batteries. (Figure No. 3)
c All LCD segments appear on the display in 3 seconds.
d Display 1 month, 1 date, 12 hour, 0 minute.
B. Setting Date and Time:
a Press MODE button ("month" starts flashing).
Press SET button to set the correct month (1,2,3,...12).
b Press MODE button again ("date" starts flashing).
Press SET button to set the correct date.
c Press MODE button again ("hour" starts flashing).
Press SET button to set the correct hour in 12-hour format. The
time is being displayed in 12-hour format, which means a time
from 13:00 onwards is being is displayed as 01
d Press MODE button again ("minute" starts flashing).
Press SET button to set the correct minute (0,1,2,3,... 59).
e Press MODE button again to switch to normal time.
(date, month, hour and minute appear on the display).
C. Steps to take blood pressure measurement:
a Wrap the cuff around the wrist (Refer to Wrapping of Wrist cuff
as (Figure No. 4 and 4-1).
26
:00.
p