Beurer BM 05 Modo De Empleo página 28

is data in the memory, at first the average values of the
Systolic rate, Diastolic rate and heart pulse will appear
without time and date. Press "RECALL" once more and the
latest recorded set of measurement which are the Systolic
rate, Diastolic rate, heart pulse, including the recording time
and date, will appear and lasting on the display for 1 minu-
te. (60 sec)
(2) Press "RECALL" button to read the next line of stored data.
The data called up on the display is numbered accordingly.
After reading the recalled data as rotatory 99-set of the
stored data, press "RECALL" to switch to normal time.
(3) To discontinue in the midst of reading of the data, press
START/STOP button to power 0ff.
c Erasing data:
(1) Take out the batteries and then refill 2 pcs batteries again.
(2) To discontinue if the data is erased. Press "RECALL" button,
no data should show up on the screen.
E. To change batteries:
When " " show up on the display, the battery is weak. Change the
batteries or it will not be possible to take blood pressure measurement.
Used batteries do not belong in the household waste. You are legally
obliged to dispose of the batteries. Dispose of them via your specialist
28