Beurer BM 05 Modo De Empleo página 27

b Sit upright on the chair to have correct posture. (Refer to
Correct Posture in Taking Blood Pressure as (Figure No. 5).
c Press START/STOP button. All elements display "888" in 3 seconds.
Afterward, displays the update time. The measuring blood pres-
sure symbol will appear on the display and then the air pressure
will automatically pump up to 195 mmHg. If blood pressure
tends to be on the high level, the air pressure will automatically
increase to the required level for measurement. Do not move or
talk in the midst of taking blood pressure measurement.
d After the air pressure is increased, it will slowly decreased. When
the pulse rate is detected, HEART RATE symbol will start flashing.
e After taking blood pressure measurement, the Systolic rate,
Diastolic rate will be lasting flash on the display for 1 minute.
D. Storing, recalling and erasing measurement data:
a Storing data:
After each blood pressure measurement, the Systolic rate, dia-
stolic rate, heart pulse rate and the time & date of specific day
will be automatically stored. The memory holds the latest 99
measurement data. If more than 99 measurements, the memory
will automatically clear out the earliest data.
b Recalling data:
(1) Pressing "RECALL" button at normal time, nothing will appe-
ar on the display if there is on data in the memory. If there
27