Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLER MENU (HOB POWER SETTING)
When first connecting to the domestic power supply, the installer must set the power of the hob cooking
areas based on the actual abilities and capacity of the power supply itself.
If this is not necessary, the hob can be turned on directly using
to access the menu.
When the power is first turned on, the symbol
Continuing to hold
, press the 4 Digits for the cooking areas ( ) one at a time in an anticlockwise direction,
starting from the one on the right.
A beep sounds each time you press, and when button
Digit
will alternately display
Digit
will display
Press Digit
and number 8 on the power bar to access the settings menu. The operation is confirmed by the
fact that the display changes from (
We are now in the hob power settings menu.
Press Digit
and select one of the values displayed in the power bar (0-1-2-3) following the table provided below.
Once the correct value has been set, confirm by holding the button down until confirmed. Once the correct value
has been entered, confirm by pressing and holding
44
and
.
.
and
) to (
, otherwise, follow the operations below
flashes.
is released it shows:
and
).
until confirmation is received.
Kw
7.4 Kw
4.5 Kw
3.5 Kw
2.8 Kw
Publicidad
