HEBU medical HBS 300i x-touch Instrucciones Para El Uso página 49

HBS 300i x-touch
8.7 Saving and accessing the program
Touching the "PROG" field causes a selection of saved
programs to appear.
To select the required program touch the relevant line. The
program you are located in is highlighted in grey.
In the main menu, the number of the accessed program and
the name are displayed
To change the program name, touch the field with the name.
In our example, this is: DR MULLER. A window opens with a keypad. The maximum symbol length is
15 characters.
To save the name, press Enter, and to quit without saving, press Esc.
Every change of the settings is automatically saved in the program you are currently in.
In order to save individual settings in a new program, initially select a free storage location. Settings
and the name of the program can then be changed at will.
8.8 Saving the program against changes
By touching the lock on the display the current program will be protected against changes.
Nevertheless it is possible to change settings during surgery. Once the device is switched off, the
settings at the time of activation the lock will be restored.
8.9 Switching off
After terminating the operation, switch off the system at the main switch and pull out the plug.
After switching off the system, all electrodes and forceps must be disconnected from the cable and
the electrode cable from the unit.
EN
49