HEBU medical HBS 300i x-touch Instrucciones Para El Uso página 56

EN
11. Review of the technical status
Before any procedure, check the cables, accessories (handles, electrodes, forceps) and foot switches
for any signs of visible irregularity. Do not use cables or instruments with broken or defective insulation.
These can result in burns if they come into contact with the skin!
11.1 Mechanical faults
If damage occurs to switches, connecting sockets, houses or the touch screen, or if the unit is dropped
on the floor, please contact your authorized dealer for advice on further use.
The dealer can arrange for a detailed technical check to be performed.
The manufacturer accepts no liability for calibration work or repairs to the unit carried out by the user.
11.2 Recurring safety inspections
A safety inspection of the electrosurgical system is required once a year. The manufacturer only permits
the use of units for which an up-to-date inspection by suitably trained personnel can be verified.
All information relating to the inspections (date, inspecting staff member, result etc.) must be recorded
in the unit's log book.
11.3 Servicing and manufacturer address
Should you require the instructions for use in paper form, please use the contact details below. The
instructions for use in paper form will be made available to you within seven calendar days of receipt
of the request.
Alternatively, you can print out the electronic instructions for use yourself.
HEBUmedical GmbH
Badstraße 8
78532 Tuttlingen / Germany
Tel. +49 7461 94 71 - 0
Fax +49 7461 94 71 - 22
eMail: service@HEBUmedical.de
Web: www.HEBUmedical.de
56
HBS 300i x-touch