Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING YOUR BOILER UNIT
1.
Ensure Boiler is OFF and there is no steam pressure in Boiler unit.
2.
Unplug your unit from the wall.
3.
Open the safety cap and dump all the water in the tank.
4.
Add fresh tap water to the tank and reapply the safety cap. Shake/swirl the
boiler in a counter-clockwise direction for 5 seconds.
5.
Remove safety cap and dump water from the tank.
NOTE:
If water is clear of sediment, you can fill the tank and begin to use it. If
you see any sediment, repeat steps 3 and 4 until the water is clear.
IMPORTANT NOTE:
the use of vinegar to clean your unit. If you use vinegar to clean your unit,
please ensure to dilute it 8:1. You must ensure all cleaners or vinegar is not
present in the tank prior to reuse. Cleaners/vinegar can harm internal parts of
the boiler unit if not removed 100%.
We do not recommend the use of any cleaning agents or
11
Publicidad
