Argo X3MI ECO 52SHB Manual De Instalacion Y Uso página 60

8. SLEEP button
By pressing this button you can select Sleep 1, Sleep 2, Sleep 3 and cancel the Sleep function.
- SLEEP 1 works in cooling and dehumidification mode: after one hour of unit operation, the
temperature will increase by 1°C, after 2 hours it will increase by 2°C; in heating mode, after one
hour of unit operation, the temperature will decrease by 1°C and after two hours will decrease by
2°C.
- SLEEP 2 the air conditioning operates on the basis of pre-set temperature curves.
In cooling mode:
1. When the initial temperature is set to 16°C-23°C, after activating the Sleep function, the
temperature will increase by 1°C every hour, after three hours the temperature will stabilize, after
7 hours the temperature will decrease by 1°C and the unit will start working constantly.
2. When the initial temperature is set to 24°C-27°C, after activating the Sleep function, the
temperature will increase by 1°C every hour, after two hours the temperature will stabilize, after 7
hours the temperature will decrease by 1°C and the unit will start working constantly.
In heating mode:
1. When the initial temperature is set to 17°C-20°C, after activating the Sleep function, the
temperature will decrease by 1°C every hour, after one hour the temperature will decrease and
the unit will maintain this constant temperature.
2. When the initial temperature is set to 21°C-27°C, after activating the Sleep function, the
temperature will decrease by 1°C every hour, after two hours the temperature will decrease and
the unit will maintain this constant temperature.
3. When the initial temperature is set to 28°C-30°C, after activating the Sleep function, the
temperature will decrease by 1°C every hour, after three hours the temperature will decrease and
the unit will maintain this constant temperature.
- SLEEP 3: it is possible to customize the sleep curve: in this mode, keep the "TURBO" key
pressed for a long time to access the setting of the CUSTOM SLEEP function.
1. The remote control timer display shows "1 hr" and the set temperature indication "88" displays
the corresponding temperature of the last set sleep curve and flashes (the first data item is
linked to the initial values of the curve set in factory).
2. Press " " and " " to adjust the corresponding temperature. After adjustment, press the
"TURBO" key to confirm.
3. At this point, the time of the timer on the remote control increases automatically in steps of 1
(ie "2 hr" or "3 hr" ... or "8 hr"). The set temperature indication "88" displays the corresponding
temperature of the last set sleep curve and flashes.
4. Repeat steps (2) and (3) until the temperature setting is complete for 8 hours; at this point the
sleep curve is set correctly. When this operation is completed, the remote control resumes
displaying the time of the initial timer and the temperature displayed is the one initially set.
9. I FEEL function
Press this button to start the I FEEL function. The
When you select this function, the remote control will send the detected ambient temperature to
the indoor unit, which will then adjust its operation automatically based on the difference between
the detected temperature and the set temperature.
Press the button again to exit the I FEEL function. The
V 01/20
icon will appear on the remote control display.
icon will disappear from the display.
60