Crux ARTISAN Serie Manual De Instrucciones página 14

BREWING A SECOND CARAFE OF COFFEE
1. To brew another carafe of coffee, press the BREW/OFF button to turn the Coffee Maker OFF.
Remove plug from wall outlet.
CAUTION: Failure to allow Coffee Maker to cool sufficiently could cause hot steam and spray
when the water is added to the water tank. The hot steam can cause severe burns.
2. Use the side tab to lift the Coffee Maker lid.
3. Unfold the gold tone coffee filter handle to lift and remove. Discard used coffee grounds,
rinse well.
4. Use the handle to lift the removable filter holder up and out of the Coffee Maker.
5. Rinse the glass carafe and removable filter holder in cool, clean water.
IMPORTANT: Before brewing a second carafe, always check to make sure water level is past
the MIN line; add the desired amount of cold water into the water tank.
6. Following the detailed instructions previously described, press the BREW/OFF button
to begin brewing.
HINTS FOR GREAT TASTING COFFEE
• A clean Coffee Maker is essential for making great tasting coffee. Regular cleaning, as described
in the Care & Cleaning Instructions and Descaling sections of this instruction manual is highly
recommended.
• Always use fresh, cold water in your Coffee Maker.
• Finer grinds, such as drip coffee, promote fuller extraction and provide rich, full-bodied coffee.
Regular grind will require slightly more coffee per cup to provide the strength of a finer grind.
• Store coffee in a cool, dry place. Once coffee has been opened, keep it tightly sealed
in the refrigerator to maintain freshness.
• For optimum coffee flavor, buy whole beans and grind them finely just before brewing.
• The flavor infusion carafe lid evenly distributes coffee throughout the brewing process
to maximize the flavors and aromas of the grounds and ensure hotter, better-tasting brews.
• Do not re-use coffee grounds since this will greatly impair coffee flavor.
• Reheating coffee is not recommended. Coffee is at its peak flavor immediately
after brewing.
• Small oil droplets on the surface of brewed, black coffee is due to the extraction of oil from
the coffee grounds. Oiliness may occur more frequently if heavily roasted coffees are used.
Over extraction may also cause oiliness, indicating a need to clean your Coffee Maker.
USER MAINTENANCE INSTRUCTIONS
This appliance requires little maintenance. It contains no user-serviceable parts. Any servicing
requiring disassembly other than cleaning must be performed by a qualified appliance repair
technician.
12