Segway Audi G30D II Manual Del Usuario página 5

EN
4 Assembling Your KickScooter
1. Unfold the handlebar stem and fasten
it. Then unfold the kickstand to
support the KickScooter.
3. Install six screws (two on each side)
with the hex wrench provided.
1
(3.0 ± 0.5 N·m)
4
06
2. Slide the handle onto the stem, making
sure they are aligned correctly.
Headlight
towards
the front
4. Verify that your KickScooter can be
powered on and off.
3
2
5
6
5 First Ride There are safety risks when learning to ride the KickScooter. You must read the
Riding Safety instructions via the app before your first ride.
For your safety, your new KickScooter is not activated and will beep occasionally after
it is powered ON.
Until activated, the KickScooter maintains a very low riding speed and cannot be
ridden with full functionality. Install the app on your mobile device (with Bluetooth 4.0
or above), connect to the KickScooter via Bluetooth and follow the app instructions to
activate your KickScooter and enjoy the full performance.
Segway-Ninebot App Scan the QR code to download the app.
Install the app and register/log in.
1
Click "Search vehicle" and pair to connect to
3
your KickScooter.
The KickScooter will beep when the connection
is successful. The Bluetooth icon will remain
illuminated.
Follow the app instructions to activate the KickScooter and learn how to ride safely.
4
You can now start to use your KickScooter, check the status with the app and interact with other
users. Have fun!
Power on the KickScooter.
2
Vehicle Fan moments Discover Me
EN
07