Lamborghini Caloreclima ALHENA TECH H Serie Instrucciones De Uso, Instalación Y Mantenimiento página 335

ALHENA TECH H
Index Description
P62 Fan minimum speed
P63 Fan on speed
P64 Fan maximum speed
P65 Not implemented
P66 Valve frequency
P67 Installation C(10)3 / C(11)3
P68 Flue parameter
Heating hysteresis after ignition.
P69
(available from MAIN and DSP FW 1.03)
* Restore Factory Values
To restore all the parameters to the factory values, set parameter b29 to 10 and confirm. Turn the
power off for 10 seconds and then back on.
At this point it is necessary to restore parameter b02 and the modified parameters to the correct
value according to the type of boiler. Parameter b27 will be automatically set to 5.
Display Adjustment Menu [DISPLAY]
Here it is possible to set some display para-
meters.
[Contrast] - Contrast adjustment
[Brightness] - Brightness adjustment
[Backlight time] - Display lighting duration
[Reset] - Restore factory values
[Lock time]* - Key lock
After keypad inactivity for a time
equal to the set value (minutes), the
symbol
are inhibited.
To reactivate the keypad, press the
buttons
2 seconds.
* This function is available from ver-
sion DSP FW 1.03.
EN
appears and the buttons
and together for about
cod. 3541V622 - Rev 00 - 05/2022
Range
DO NOT MODIFY
(The parameters are automatically updated)
DO NOT MODIFY
(The parameters are automatically updated)
DO NOT MODIFY
(The parameters are automatically updated)
--
0 ÷ 2
0 = Disabled
1 = Enable installation C(10)3 - C(11)3
0 ÷ 10 (modify according to flue table)
6 ÷ 30 °C
Contrast
Brightness
Backlight time
Lock time
Reset
Default
G20/G230:
28 kW = 47
34 kW = 49
45 kW = 50
G30/G31:
28 kW = 49
34 kW = 48
45 kW = 48
G20/G230:
28 kW = 160
34 kW = 140
45 kW = 140
G30/G31:
28 kW = 152
34 kW = 132
45 kW = 136
G20/G230:
28 kW = 172
34 kW = 194
45 kW = 180
G30/G31:
28 kW = 156
34 kW = 186
45 kW = 172
1
1
0
0
10
DISPLAY
5
Max
10m
OFF
fig. 41
335