Keysight U1253B Guía Del Usuario Y Servicios página 62

Making Measurements 2
A (ampere) measurement
Set up the multimeter to measure A (ampere) as shown in Figure 2-5. Probe the
test points and read the display.
Connect the red and black test leads to 10 A input terminals A (red) and COM
NOTE
(black) respectively. The multimeter is set to measurement automatically
when the red test lead is plugged into the A (red) terminal.
Black Lead
Red Lead
Figure 2-5 A (ampere) current measurement
Keysight U1253B User's and Service Guide 61