KlipXtreme TitanPro KBS-300 Manual De Instrucciones página 4

B. Turning the speaker units on or off
• To turn on the speaker, press and hold the power/mode button for about 2
seconds.
• The Bluetooth indicator LED will turn on and you will hear a tone. The Bluetooth
®
LED will blink in white.
• Press and hold the power/mode button again for 2 seconds to turn off the speaker.
The Bluetooth LED will turn off and you will hear an audio tone.
®
• Adjust the volume on your audio device to the desired level.
• Press the + or – button on the unit to adjust the unit's volume.
• Hold the + or – button on the device to go to the previous or next track.
• Press the multifunction button at the same time than the power/mode button to
play or pause music.
C. Using the speaker in Auxiliary mode
• Connect one end of the 3.5mm stereo cable into the auxiliary port on the speaker.
• Proceed to connect the other side of the 3.5mm stereo cable into the media
device of choice, such as a laptop, music player, smartphone or tablet.
• Turn on the speaker. The speaker will automatically connect the Aux in.
• If it doesn't connect, briefly press the power button on the speaker to select the
Aux in mode or the mode of choice.
• Select the input mode of choice using the source button on the unit.
• Play an audio file to listen to music.
• Press the + or – button on the unit to adjust the system volume.
IV. Advanced operation
Note: Before installing this product, please make sure your device has the built-in
feature available.
®
Bluetooth
®
A. Pairing the speaker with your mobile device in Bluetooth
1. Turn on the speaker.
2. Set your Bluetooth
®
3. The Bluetooth indicator LED will start blinking to indicate that the device has
®
entered into the pairing mode and is ready to be detectable for the first time.
4. Tap the newly discovered audio device (KBS-300) displayed on your mobile
phone, in the Bluetooth
5. If you have a lower Bluetooth
0000 (4 zeros).
6. If pairing is successful, a tone will be heard, and the LED light will glow in blue. If
after 60 seconds the pairing process fails, please repeat steps 1 through 6 described
above.
7. We recommend turning off the device when not in use. The speaker will shut off
automatically after a period of inactivity, as long as it is not in the Bluetooth
Note: The speaker will connect to Bluetooth
automatic connection.
B. Pairing the speaker with your mobile device in TWS mode
1. Power on the two KBS-300 speakers .
2. Press twice the power/mode button
the white LED will blink quickly.
phone to "discover" the wireless speaker.
list.
®
version, you may be prompted to enter the passkey
®
automatically if the device supports
®
on both speakers to enter TWS mode,
mode
®
mode.
®