Publicidad
Idiomas disponibles
Idiomas disponibles
3. You will hear a tone after both units are paired, the master unit will remain in
pairing mode.
4. Turn on Bluetooth
on the audio device and pair it with the master unit as
®
instructed in section A.
C. Unpairing speaker from TWS mode
Quickly press twice the power/mode button
LED on the second unit will start blinking (a tone will also be emitted). Once you
hear the tone, TWS un-pairing was successful.
V. Using the speaker to answer or end a call
• When there is an incoming call, the speaker will generate a tone to alert you of this
event.
• Press the multifunction button to answer the call on the speaker, you can talk close
to the speaker as the built-in microphone is located on the upside of the
multifunction button, it will allow clear voice reproduction. You may also press the
answer button on your phone to take the call using the speaker.
• To end a call, press the multifunction button once again. Likewise, you may also
end the call directly using the command on your cell phone.
• When listening to music using your mobile phone, playback will resume
automatically once the call has ended.
• Press the multifunction button for approximately two seconds on the speaker in
order to reject an incoming call.
• Press the multifunction button twice to call back the last number dialed on your
phone.
on the master unit, the Bluetooth
®
VI. Music playback
Note: Music playback will work individually or in TWS mode.
• Press the multifunction button to start and stop audio playback.
• Press and hold the + button to play the next track.
• Press and hold the – button to play the previous track.
• In order to adjust the volume level, briefly press the + or – button.
VII. Troubleshooting
Problem
The unit will not power on
Can't hear any sound
Sound from the speaker is distorted
Can't pair the speaker with my
device
Bluetooth
®
Solution
Make sure the speaker is turned on. Check if the
speaker is fully charged
Make sure the volume of the speaker is not at
the minimum setting. Make sure the connected
audio device is playing audio
Lower the volume level of the speaker or the
connected device
Make sure the Bluetooth
mode of your device is
®
turned on. Your Bluetooth
device may be out of
®
range. Try moving it closer to the speaker. Move
your Bluetooth
device and/or the speaker away
®
from other devices that generate
electromagnetic interference, such as phones,
microwave ovens, wireless network routers, or
other Bluetooth
devices
®
Publicidad
