Publicidad
Idiomas disponibles
Idiomas disponibles
Components
Carrying string for easy transport.
1. Lanyard
Hold the button to power on or off. Press the button
2. Power/mode button
to select mode. Press it twice to enter TWS pairing
mode.
3. LED function indicator
Bluetooth
Successful pairing: White LED blinks slowly.
Aux. cable connected: White LED stays on.
Mute: White LED blinks slowly.
Microphone LED indicator.
4. Microphone
Briefly press this button to play or pause audio.
5. Play/pause, answer call/end
Briefly press this button to answer an incoming call or
call/Bluetooth
multifunction button
®
end the call.
Hold the button briefly to disconnect the Bluetooth
connection.
Press and hold this button to reject a call.
Press this button twice to call back the last number
dialed on your phone.
Note: Audio will stop and resume automatically once
the call is ended.
To adjust the volume level, briefly press the - button.
6. Volume down -/previous track
Press and hold the - button to play the previous track.
button
To adjust the volume level, briefly press the + button.
7. Volume up +/next track button
Press and hold the + button to play the next track.
Description
mode: White LED blinks fast.
®
8. Aux. in cable connection interface
9. Battery LED charge indicator
10. Micro USB charging port
III. Basic operation
A. Charging the speaker
• Plug one end of the supplied Micro USB cable into the speaker's Micro USB port
and the other end to the USB port of a 5V USB adapter to charge the battery.
®
• The battery takes around 3.5 hours to fully charge.
• Make sure that the speaker is fully charged before using it for the first time.
• While the speaker is being charged, the charging LED glows red.
• The charging LED turns off once the speaker is fully charged.
Note: If the speaker is completely discharged or has not been charged for a while, it
is recommended to charge it for at least 10 minutes prior to powering on the
speaker.
Use this input to connect any external audio device
fitted with a 3.5mm stereo output
This LED indicates the charging status of the speaker
Use this Micro USB connector to connect to an
external 5V power source
Publicidad
