Publicidad
Idiomas disponibles
Idiomas disponibles
B. Turning the speaker unit on or off
• To turn on the speaker, press and hold the power/mode button for about 2
seconds.
• The LED function indicator will turn on and you will hear a tone.
• Press and hold the power/mode button again for 2 seconds to turn off the speaker.
The LED function indicator will turn off and you will hear a tone.
C. Using the speaker in Auxiliary mode
• Connect one end of the 3.5mm stereo cable into the auxiliary port on the speaker.
• Proceed to connect the other side of the 3.5mm stereo cable into the media
device of choice, such as a laptop, music player, smartphone, or tablet.
• Turn on the speaker. The speaker will automatically connect to Aux. in.
• If it doesn't connect, briefly press the power/mode button on the speaker to select
the Aux. in mode or the mode of choice.
• Select the input mode of choice using the source button on the unit.
• Play an audio file to listen to music.
IV. Advanced operation
Note: Before installing this product, please make sure your device has the built-in
feature available.
Bluetooth
®
A. Pairing the speaker with your mobile device in Bluetooth
1. Turn on the speaker.
2. Set your Bluetooth
phone to "discover" the wireless speaker.
®
3. The Bluetooth
entered into the pairing mode and is ready to be detectable for the first time.
4. Tap the newly discovered audio device (KBS-200) displayed on your mobile
phone, in the Bluetooth
5. If you have a lower Bluetooth
0000 (4 zeros).
6. If pairing is successful, a tone will be heard, and the LED light will glow in white. If
after 60 seconds the pairing process fails, please repeat steps 1 through 6
described above.
7. We recommend turning off the device when not in use. The speaker will shut off
automatically after a period of inactivity, as long as it is not in the Bluetooth
Note: The speaker will connect to Bluetooth
automatic connection.
B. Pairing the speaker with your mobile device in TWS mode
1. Power on the two KBS-200 speakers.
2. Press twice the multifunction button on both units to enter TWS mode; the white
LED will blink quickly.
3. You will hear a tone after both units are paired, the master unit will remain in
pairing mode.
4. Turn on Bluetooth
instructed in section A.
mode
®
indicator LED will start blinking to indicate that the device has
®
list.
®
version, you may be prompted to enter the passkey
®
automatically if the device supports
®
on the audio device and pair it with the master unit as
®
mode.
®
Publicidad
