Giandel PS-300C Guia Del Usuario página 5

English
Problem
Starting alarm ?
Got 40V or so while
testing inverter's
ground wire and
zero line?
If the unit still doesn't work normally after using all the methods above, it maybe the
internal faults of the circuit. Please contact us after service.
WARRANTY
This product is designed using the most modern digital technology and under very strict quality control
and testing guidelines. If however, you feel this product is not performing as it should, please contact us:
support@giandel.com.au
We will do our best to resolve your concerns. If the product needs repair or replacement, make sure
to keep your receipt/invoice, as that will need to be sent back along with the package and prepaid to
GIANDEL.
Except as noted above, GIANDEL makes no warranty of any kind, express or implied, including
without limitation the implied warranties of merchantability and fitness for a particular purpose. In no
event shall GIANDEL be liable for indirect, special or consequential damages. This warranty only applies
to GIANDEL branded products. All other name brand products are warranted by and according to their
respective manufacturer. Please do not attempt to return non-GIANDEL branded products to us.
The following situations will void warranty:
1. The box is distorted, damaged or changed, and interior parts damaged because
of an exterior hit or drop not reported at time of delivery.
2. Connect the DC power incorrectly reversing the polarity.
3. Dismantled or repaired the unit by an unauthorized person.
4. The unit was damaged by incorrect installation or operating method.
To find out where to buy any of our products, you may also e-mail:
Welcome to use GIANDEL power inverter. If you have any query during using our
5
Reason
The main reason is that ths instantaneous
current is too large, which leads to the
detection of low voltage and trigger
under-voltage alarm.
This valtage has no meaning, zero line can
be ground.
support@giandel.com.au .
inverter, please contact our service team by email:
support@giandel.com.au
Solutions
Please restart the inverter several times.
This is normal, there is no current leakage.