Dentsply Sirona Thermaprep B00THPR230VEU Instrucciones De Uso página 8

10) ADDITIONAL INFORMATION
The oven is designed with two precision heating alerts:
• First size LED button blinks: The targeted temperature of the heating element was not reached within
specified time (time-out). Use the other heating element to warm the obturator. This may be re-set by
disconnecting and then reconnecting the power plug to the mains power. If the error occurs again the
oven should no longer be used and sent for repair.
• Second size LED button blinks: The hardware safety circuit has been activated due to a failure in the
heating element, causing overheating. This may be re-set by disconnecting and then reconnecting the
power plug to the mains power. If the error occurs again the oven should no longer be used and sent for
repair.
Any serious incident in relation to the product should be reported to the manufacturer and the competent
authority of the country in which the serious incident occurred.
Symbols
Instructions for use translator
Class II equipment
Caution: hot surface
SN
Serial number
CE marking, compliance with applicable EU legislation
Alternating current
Medical device
Reference number
Unique device identifier
Distributor
Thermaprep®
Obturator Oven
END-IFU-THERMAPREP-V01-WEB-EUR-multilingual-2021-05
EN
8/219