Publicidad
Idiomas disponibles
Idiomas disponibles
DOOR STOP
1. Make sure the door slate is in the correct position, otherwise the
door cannot close properly.
2. It is normal for the door stop to heat up, as it is equipped with an
integrated heating element for protection against condensation.
BEFORE FIRST USE
Before using the device, remove all wrappings, including corks and
rubber straps. Adjust the feet and clean the outside and inside of
the refrigerator with a warm cloth. Do not start the refrigerator
immediately after installation, it must be started after 2-6 hours of
standing to ensure proper operation. To avoid damage to the power
cable and any consequential incidents, the power cable should not
be covered by the appliance itself or other objects. Before switching
on, please check if the voltage range of the refrigerator is the same
as the power supply. When the refrigerator is first installed, allow it
to stabilize at normal operating temperatures for 2-3 hours before
filling with fresh or frozen food. If the operation is interrupted, wait 5
minutes before restarting.
36
Publicidad
