Publicidad
Idiomas disponibles
Idiomas disponibles
This device is designed to ensure maximum reliability. However, if a
problem occurs, you can get to determine the cause if you follow
the directions suggested in this chapter.
Do not open your appliance, as there is risk of electrocution.
If you cannot solve the problem contact the seller or the
manufacturer.
All users should become familiar with the instructions. Knowing
what can go wrong can be of help to prevent further problems are
caused.
Problem
The appliance
does not work
The device does
not work
properly
The appliance is
cooling more
than expected
The appliance is
not cooling as
expected
Make sure that the device is correctly plugged in, that the
fuse is not blown or that a power failure has not
occurred.
The room temperature is too low. Try adjusting the
camera temperature to a cooler level to solve this
problem.
It is normal for the freezer not to operate during the
automatic defrost cycle or for a short period of time after
the appliance is turned on to protect the compressor.
The temperature knob it may be at the maximum
position.
If you have placed food that contains a lot of moisture
under the cooling vents, remove the food from the area.
The food may be too close which will block the air
circulation. You may have placed hot foods or too many
foods inside the refrigerator. The door may not be closed
correctly. The rubber on the door may be damaged. The
refrigerator may not be ventilated. There may not be
enough free space between the top and side spaces of
the refrigerator and other surfaces.
The temperature regulator may not be positioned
correctly.
Solution
44
Publicidad
