MSW Motor Technics MSW-OD-10 Manual De Instrucciones página 16

ASSEMBLY OF THE DEVICE
1. Install the handle bar in the opening in the vessel base.
2. Use clamping screws to install the cross bar in the middle of the handle bar height.
3. Connect the drain pipe with the funnel bowl.
4. Insert the drain pipe with the bowl inside the opening of the cross bar and secure
with clamping screw.
5. Install the wheels.
3.3. Working with the device
1. Place the recovery vessel on the base.
2. Insert the drain pipe into the recovery vessel.
3. Lift the vehicle, and make sure it is properly secured.
4. Place the drainer under the vehicle in such a manner that the funnel bowl is
located directly under the oil tank.
5. Open the oil inlet valve, and unscrew the oil drain plug.