Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
English
high volume pump inflator connection
the universal valve adapter is not pointed at anyone
or anything.
1. Remove the high-volume hose
storage location.
•
Line up the hose end
23
deflate connection
11
is securly in place.
2. Insert the hose, or it's tapered nozzle
being deflated.
3. Press the high-volume side of the mode power
switch
2
, as shown in figure g, indicated by the air
mattress symbol.
4. To turn off, push the power switch to the center position.
5. To remove the hose, twist the hose clockwise and slide
hose off.
Figure H
Setting the automatic shut-off pressure
nOTE: The LCD will only show inflation pressures when the
inflator is being used. In both inflation and pump mode the
unit will show battery status.
1. To switch between the different units (psi, bar or kPa),
press the pressure mode button
units are displayed.
2. Press the - or + pressure setting buttons
required pressure is displayed.
3. After 3 seconds the display will flash and return to a
reading of "0.0". This is normal.
4. Connect the universal valve adaptor and accessories,
if required, to the item to be inflated, making sure that
the lever of the valve adaptor is in the down position to
lock it in place.
5. To start the inflator press the mode power switch
towards the side of the tire symbol.
6. When the item to be inflated has reached the preset
value the unit will automatically turn off. nOTE: You
may notice the actual pressure reading may drop after a
couple of seconds. This is normal.
7. To stop the inflator at any time, press the main power
button back to the center position.
nOTE: If the AC/DC power switch is turned off, all settings
will be lost and will need to be reentered. This is a safety
feature to prevent the risk of items OVER INFLATING.
10
12
. Ensure
from the
7
with the high-volume pump
. Then, firmly slide in the hose so it
into the object
8
23
11
5
until the required
until the
4
Using the inflator as a pressure gauge
1. Connect the universal valve adaptor
be checked.
2. Press the mode power switch
symbol.
3. The LCD will display the item's pressure.
4. After checking, press the mode power switch
to the center position and return the air hose to the
storage location.
MAINTENANCE
Use only a dry cloth to clean the tool. Never let any liquid
get inside the tool; never immerse any part of the tool into
a liquid.
iMPORTAnT: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those listed
in this manual) should be performed by authorized service
centers or other qualified service personnel, always using
identical replacement parts.
7
ACCESSORIES
Recommended accessories for use with your appliance are
available from your local dealer or authorized service center.
If you need assistance regarding accessories, please call:
1-800-544-6986.
WARNING: The use of any accessory not
recommended for use with this appliance could
be hazardous.
2
,
9
to the item to
, on the side of the tire
2
back
2
Publicidad
Tabla de contenido
