necessary to wait for one channel to exit programming
before switching to storing the codes on the other
- PROGRAMMING FROM TACT DEC
• Press the CH1 key one time; the relative LED will
flash 1 time;
• on the keyboard press a 4-digit numeric code
*
*
followed by
2: Ex. 4321
2;
• if the code is stored, the successful storage will
be signalled by 1 long BEEP;
• if the code is not stored, the error will be signalled
by 3 short BEEPS.
- PROGRAMMING FROM TACT KEYBOARD
• Type a master code previously stored (flashing of
the red input LED in programming);
• type the code to be stored followed by
*
4321
2);
• if the code is stored, the successful storage will
be signalled by 1 long BEEP;
• if the code is not stored, the error will be signalled
by 3 short BEEPS.
- PROGRAMMING FROM TACT CARD
• Pass a master card previously stored;
• move the card to be stored closer to the TACT
CARD;
• if the code is stored, the successful storage will
be signalled by 1 long BEEP;
• if the code is not stored, the error will be signalled
by 3 short BEEPS.
WARNING: As long as the CH1 or CH2 LED
programming flashes in the TACT DEC, it will be
possible to store other codes or MASTER cards (max
10) or USER (max 250); the decoder will exit the
programming automatically after about 20 seconds
of inactivity
CLEARING CH1 CODES
• Press CH1 3 times until the CH1 LED remains on;
• press and hold key CH1 for 5 seconds; the LED
will flash quickly;
• the cancellation is completed when the LED turns
off.
CLEARING CH2 CODES
• Press CH2 3 times until LED CH2
remains on;
• press and hold key CH2 for 5 seconds; the LED
will flash quickly;
• the cancellation is completed when the LED turns
off.
ACTIVATING BOTH CHANNELS WITH KEYBOARD
• Store the desired user code on both channel 1
and channel 2 (see previous paragraphs);
• Type the user code stored on both channels
*
followed by
3 (e.g. 4321
channels.
DEADMAN
The commands sent by the TACT-DEC are impulsive,
however it is possible to activate the command with
the "man present" function by typing a stored code
*
*
followed by
4 (example 4321
key 4.
DISPOSAL
A number of components of the item can
*
2 (e.g.
be recycled while others, such as electronic
components
must
be
accordance with the regulations in force in the country
of installation.
A number of components may contain pollutants that
must not be released into the environment.
*
3) to activate both
4) and holding down
disposed
of
in