Publicidad
Idiomas disponibles
Idiomas disponibles
TABLE OF CONTENTS
Table of contents .............................................................
Introduction ......................................................................
Product specifications ......................................................
General safety rules .........................................................
Specific rule for the drill press .........................................
Electrical information .......................................................
Know your drill press .......................................................
INTRODUCTION
Thanks for purchasing the KNOVA Drill Press. We know you are excited to put your tool to work, but first, please take a
moment to read through the manual. Safe operation of this tool requires that you read and understand this operator's manual
and all the labels affixed to the tool. This manual provides information regarding potential safety concerns, as well as helpful
assembly and operating instructions for your tool.
WARNING
Indicates danger, warning, or caution. The safety symbols and the explanations with them deserve
your careful attention and understanding. Always follow the safety precautions to reduce the risk of fire,
electric shock or personal injury. However, please note that these instructions and warnings are not substitutes for
proper accident prevention measures.
NOTE: The following safety information is not meant to cover all possible conditions and situations that may occur.
KNOVA reserves the right to change this product and specifications at any time without prior notice.
At KNOVA, we are continuously improving our products. If you find that your tool does not exactly match this manual, please
visit www.knova.com.mx for the most up-to-date manual or contact our customer service at 1-800-70 56682.
Keep this manual available to all users during the entire life of the tool and review it frequently to maximize safety for both
yourself and others.
PRODUCT SPECIFICATIONS
Motor:
120 V, 60 Hz, 5 Amps.
Chuck capacity:
1/32 in - 5/8 in (Ø16 mm)
Spindle travel:
3-5/32 in (80 mm)
Taper:
JT3
Speed range:
580 - 3200 RPM (no load)
Swing:
12 in (300 mm)
GENERAL SAFETY RULES
WARNING
Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious
injury.
Safety is a combination of common sense, staying alert and
knowing how your item works. The term "power tool"
in the warnings refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.
SAVE THESE SAFETY INSTRUCTIONS.
WORK AREA SAFETY
1. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
3. Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
1
Assembly and adjustments ..............................................
1
Operation ........................................................................ 10
1
Maintenance ...................................................................
1
Troubleshooting ..............................................................
2
Parts list (assembly) .......................................................
3
Parts list (pieces) ............................................................ 15
4
Exploded view .................................................................
Table size:
Table tilt:
Column dia.:
Laser:
Machine height:
Gross/net weight:
ELECTRICAL SAFETY
1. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body
is earthed or grounded.
3. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
4. Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
5. When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
1
9-1/2 in x 9-1/2 in (240 x 240 mm)
0º to 45º left and right
2-1/2 in (65 mm)
Class IIIA 2.5 mW
36-1/2 in (927 mm)
87.7 lb (39.8 kg) / 83.7 lb (38 kg)
5
12
13
14
16
Publicidad
