Foppapedretti Divo Manual De Instrucciones página 203

• ENGLISH •
INSTALLING THE ISOFIX BASE
PICTURE 4
Step 7. Push the base, against the backrest of the passenger seat so that the anti-
rebound bar adheres perfectly to the backrest.
PICTURE 5
Step 8-9. Press the button to adjust the support leg and lower it down so that
it correctly touches the vehicle floor. The control device located at the base of
the support leg should move from red to green, indicating that the leg has been
placed correctly. Check that the support leg is positioned and adjusted correctly.
Make sure that the support leg does not raise the base from the surface of the
vehicle seat.
Do not place the front support leg on a floor storage compartment lid. The front
support leg MUST make full and firm contact with the vehicle floor.
PICTURE 6
Step 10-11. Place the car seat onto the ISOFIX base in a rear-facing position.
Press the red "PRESS" button. A click will indicate successful
attachment. Check that the indicator has moved from red to green "LOCK".
IMPORTANT: After having attached the seat to the base, lift up the car seat to
make sure that it has clicked into place correctly.
PICTURE 7
Step 12. Adjust the car seat carrying handle against the passenger seat backrest,
referring to the car seat manual for how to recline the handle.
PICTURE 8
At this point you can place the child in the car seat, referring to the car seat user
manual for the correct usage.
REMOVING THE CAR SEAT FROM THE ISOFIX BASE
Removing the car seat - PICTURE 9
To remove the car seat from the Isofix base, move the carrying handle into a
vertical position, pull the redcoloured stationary stabiliser placed on the front of
the Isofix base, and then lift up the car seat.
31