Publicidad
Idiomas disponibles
Idiomas disponibles
PARTS NAME OF REMOTE CONTROLLER
Wireless remote controller and its
functions
COMFORT
SLEEP
Infrared signal emitter
Transmits a signal to the indoor unit.
START/STOP button
Press the button to start operation.
(A receiving beep is heard.)
Press the button again to stop operation.
(A receiving beep is heard.)
If no receiving sound is heard from the indoor unit,
press the button twice.
Mode select button (MODE)
Press this button to select a mode.
Each time you press the button, a mode is selected
in a sequence that goes from A : Auto
: Cool,
: Dry,
and back to A. (A receiving beep is heard.)
Temperature button (
...........The set temperature is increased up to
8 6°F (
...........The set temperature is dropped down to
62°F ( 17°C)
Fan speed button (FAN)
Press this button to select fan speed.
When you select AUTO, the fan speed is
automatically adjusted according to the room
temperature.
Carrier 1121250221.indb 12
Carrier 1121250221.indb 12
SWING
FAN
FIX
QUIET
Hi POWER
: Heat,
: Fan only,
)
30°C)
(A receiving beep is heard.)
You can also manually select the desired fan speed
from among ve settings.
(LOW
, LOW
+
MED
+
, HIGH
(A receiving beep is heard.)
Auto louver button (SWING)
Press this button to swing the louver.
(A receiving beep is heard.)
Press the SWING button to stop the louver
swinging.
(A receiving beep is heard.)
Set louver button (FIX)
Press this button to adjust the air ow direction.
(A receiving beep is heard.) While this button is kept
depressed, the receiving tone continuously sounds.
Off timer button (OFF)
Press this button to set the OFF timer.
On timer button (ON)
Press this button to set the ON timer.
Reserve button (SET)
Press this button to reserve time settings.
(A receiving beep is heard.)
Cancel button (CLR)
Press this button to cancel ON timer and OFF timer.
(A receiving beep is heard.)
High power button (Hi POWER)
Press this button to start the high power operation.
This function is not operated group control.
PRESET button
Press this button to change the operation mode to
the preferred operation mode memorized previously.
To memorize the operation mode, press this button
for at least 3 seconds during the preferred operation
mode.
is displayed and the operation mode is
memorized.
COMFORT SLEEP button
Press this button to start the OFF timer operation
that automatically adjusts the room temperature and
the fan speed.
You can select the OFF timer time from four
durations (1, 3, 5 or 9 hours).
During group control operation, the set temperature
and the fan speed are not automatically adjusted.
Only off timer function is activated.
QUIET button
Press this button to start quiet operation.
Pressing this button again will restore normal
operation.
– 12 –
Owner's Manual
, MED
,
)
9/26/22 11:15 AM
9/26/22 11:15 AM
EN
12-EN
Publicidad
