Toshiba Carrier MMK-UP0071HP-UL Manual Del Propietário página 20

Once you select the timer operation mode, the
settings are saved in the remote controller.
Thereafter, the air conditioner will start operating
under the same conditions when you simply press
the ON/OFF button of the remote controller.
If the clock display is ashing, you cannot set the
timer.
Follow the instructions in the section "SETTING
THE CLOCK" and then set the timer.
Combined timer (Setting both ON and
OFF timers simultaneously)
OFF timer ON timer
(Operation Stop
This feature is useful when you want to stop the air
conditioner after you go to sleep, and start it again
in the morning when you wake up or you return
home.
Example:
To stop the air conditioner and start it again next
morning.
Operation
Setting combined TIMER
1. Press the OFF TIMER
OFF timer.
2. Press the ON TIMER
ON timer.
3. Press the SET
19-EN
Carrier 1121250221.indb 19 Carrier 1121250221.indb 19
Operation)
Operation again
Stop
button to adjust the
button to adjust the
button.
ON timer OFF timer
(Stop Operation
You can use this setting to start the air conditioner
when you wake up and stop it when you leave the
house.
Example:
To start the air conditioner next morning and stop it.
Stop
Setting combined TIMER
1. Press the ON TIMER
ON timer.
2. Press the OFF TIMER
OFF timer.
3. Press the SET button.
• Either ON or OFF timer function which is closer
to the current time, is activated rst.
• If the same time is set for both ON and OFF
timers, no timer operation is performed. Also, the
air conditioner may stop operating.
Every day combined timer (setting
both ON and OFF timer simultaneously
and activate every day.)
This feature is useful when you want to use
combined timer at the same time every day.
Setting combined TIMER
1. Press the ON TIMER
ON timer.
2. Press the OFF TIMER
OFF timer.
3. Press the SET button.
4. After step 3, an arrow mark (
about 3 seconds and during this ashing, press
the SET button.
• During the every day timer is activating, both
arrows ( , ) are indicated.
Cancel the timer operation
Press the CLR button.
Clock display
During the TIMER operation (ON-OFF, OFF-ON,
OFF timer) clock display is disappeared so as to
show the setting time. To see the present time,
press SET button the present time is displayed
about 3 seconds.
– 19 –
Owner's Manual
Stop)
Operation
Stop
button to adjust the
button to adjust the
button to adjust the
button to adjust the
or ) ashes for
9/26/22 11:15 AM 9/26/22 11:15 AM