Roadstar TTR-8850ED+BT Manual De Instrucciones página 6

2 English
Objects have fallen into or liquids has been spilled into the radio;
The appliance has been exposed to rain;,The appliance has been dropped or the en-
closure damaged;, The appliance does not appear to operate normally.
SERVICING - The user should not attempt to service the appliance beyond that de-
scrive in the user operating instructions. All the servicing should be referred to quali-
fied service personnel
Note: If the display does not function properly or no reaction to operation of any con-
trol may due to the electrostatic discharge. Switch off and disconnect the AC cord and
remove all the batteries, then turn the power back on after a few seconds.
POWER SOURCES
AC POWER: To power on stereo system plug the AC/DC adaptor into the DC plug
(26) at the back of the unit and into a wall AC power outlet.
Check that the rated voltage of your appliance matches your local voltage.
TO USE THE PRODUCT
Press the [STANDBY] button (11) to power on the unit;
Select the desired audio source by pressing the [MODE] button (16) repeatedly;
(Please see detailed instructions for each Source in the following chapters);
Adjust the volume with the [VOLUME KNOB] (10) to the desired level;
MUTE: short press [SCAN/PLAY] button (23) or [MUTE] (1) on remote control.
Long press the [STANDBY] button (11) to turn OFF the unit. Short press for Stand by.
Note: When no sound is produced, the unit will switch OFF automatically after 10 mi-
nutes.
SYSTEM SETTINGS
Long press [MENU] (13) button, select desired menu with [TUNING/SELECT] button
(14) and confirm with [SELECT] (14) button.
Time: setting time
Alarm: setting alarm MODE.
Language: Set a different language
Backlight: Set the time of full display time and the brightness level .
Sleep: you can select sleep timer
Equalizer: you can choose EQ settings
Factory reset: Restore to factory settings.
SW version: shows the current software version
To turn back previous MENU, press [MENU/INFO] button (13).
CLOCK SETTING
Press and hold [MENU/INFO] button (13) to access to the setting. Time.
Set Time/Date: Set the time and date. It can be modified separately: hour, minute,
year, month, and day information.
Auto update: Time and date are automatically updated, can choose Update from any
(Default)/ No update / Update from FM/ Update from DAB.
Set 12/24 hour: Select 12/24 hour time display. Default is '24 hour display'.
Set date format: Select date display format. Options are: DD MM YYYY (Default)/
MM DD YYYY.