Lindy 38355 Manual De Usuario página 17

Benutzerhandbuch
15, 4K2K60_420,HD Audio 7.1
16, 4K2K60_444,
Stereo Audio 2.0
17, 4K2K60_444,
Dolby/DTS 5.1
18, 4K2K60_444,HD Audio 7.1
19, 4K2K60_444,
Stereo Audio 2.0 HDR
20, 4K2K60_444,
Dolby/DTS 5.1 HDR
21, 4K2K60_444,
HD Audio 7.1 HDR
22, copy from hdmi loop out
23, copy from hdbt output 1
24, copy from hdbt output 2
25, copy from hdbt output 3
26, copy from hdbt output 4
27, use user 1 EDID
s edid user1 Einstellen der User1 EDID-Daten
00
FF FF FF FF
...!
Abrufen der User1 EDID-Daten
r edid user1!
Abrufen des EDID-Status des
r edid in!
Eingangs
Abrufen der EDID-Daten des
r edid in data!
HDMI Eingangs
RS-232 Bypass-Einstellungen
s rs232 Einstellen der Verbindung des
bypass RS-232-Ports mit dem HDBT
hdbt y! out1 Receiver/Empfänger
RS-232 Port, y=0~5(0=all,
1~4= hdbt out 1~4 5=NC)
Abruf der Verbindung vom RS-232
r rs232
port und HDBT out Receiver
bypass!
RS-232 port
s device baud Empfänger-Steuergerät einstellen
w size x stop COM-Port-Einstellung, w=2400,
y 4800,9600,19200,38400,
parity z! 57600,115200, x=7,8
y=1,2, z= keine, gerade,
ungerade
s rs232 time RS232-Sendebefehl einstellen
x! Wartezeit
s edid user1 EDID data: 00
user1 00 ff FF FF ....
ff ff ff .... !
r edid user1 EDID data: 00
user1! FF FF FF FF FF FF
00 .........
r edid in! input EDID: 4K2K60_
444,Stereo Audio 2.0
r edid in EDID data: 00 FF FF
data! FF FF FF FF 00 ......
s rs232 RS-232 connect to
bypass HDBT OUT1
hdbt 1! RS-232 not connect
to HDBT OUT
r rs232 RS-232 connect to
bypass! HDBT OUT1
RS-232 connect to all
HDBT OUT
RS-232 not connect
to HDBT OUT
s device receiver device COM
baud port setting
57600 size baudrate: 57600
8 stop 1 data size :8, stop:1
parity parity: none
none!
s rs232 send RS-232
time command wait time
Deutsch
y=0
200ms