Lindy 38355 Manual De Usuario página 3

User Manual
Safety Instructions
! WARNING !
Please read the following safety information carefully and always keep this document with
the product.
Failure to follow these precautions can result in serious injuries or death from electric
shock, fire or damage to the product.
Touching the internal components or a damaged cable may cause electric shock, which
may result in death.
This device is a switching type power supply and can work with supply voltages in the range 100 - 240
VAC.
To reduce risk of fire, electric shocks or damage:
Do not open the product nor its power supply. There are no user serviceable parts inside.

Only qualified servicing personnel may carry out any repairs or maintenance.

Never use damaged cables.

Do not expose the product to water or places of moisture.

Do not use this product outdoors it is intended for indoor use only.

Do not place the product near direct heat sources. Always place it in a well-ventilated place.

Do not place heavy items on the product or the cables.

Please ensure any adapters are firmly secured and locked in place before inserting into a wall socket

Introduction
Thank you for purchasing the 100m Cat.6 4 Port HDMI 4K60 HDBaseT Splitter Extender. This product has
been designed to provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty
and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it
for future reference.
This transmitter can distribute and extend one source signal to up to 4 displays using any HDBaseT
receiver (not included). It supports video resolution up to 4K60Hz, distances up to 100m, digital and analog
de-embedded audio, IR, RS-232 and advanced EDID management.
It can manage also PoC (Power over Cable) function from the transmitter to the HDBaseT receivers with
this function to connect only one PSU to the transmitter and power on the receivers just by connecting
Cat.6 cables.
HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
Please Note: The quoted lengths, resolutions and features are possible if the HDBaseT receiver
connected supports the same features.
Package Contents
4 Port HDBaseT Extender Splitter - Transmitter

IR Emitter Cable, 1.5m

IR Receiver Cable, 1.5m

2 x Mounting Ears & 4 x Screws

3-Pin Terminal Block

5-Pin Terminal Block

24VDC 3.75A IEC Power Supply, Screw Type DC Jack: 5.5/2.1mm

4 x Power cables (EU, UK, US & AUS), 1.5m

Lindy Manual

English