Playing Back Ipod/Itunes Music Via A Network (Airplay); Playback Of Ipod/Itunes Music Contents - Yamaha R-N301 Manual De Instrucciones

Playing back iPod/iTunes music via a network (AirPlay)

The AirPlay function allows you to play back iPod/iTunes
music on the unit via network.
PC
iTunes
Starts playback
on iTunes
or iPod
Router
iPod
Note
To use this function, the unit and your PC or iPod must be
connected to the same router (p.13). You can check whether the
network parameters (such as the IP address) are properly assigned
to the unit in "Information" (p.33) in the "Setup" menu.
AirPlay works with iPhone, iPad, and iPod touch with iOS
4.3.3 or later, Mac with OS X Mountain Lion, and Mac and
PC with iTunes 10.2.2 or later.
(as of August 2014)

Playback of iPod/iTunes music contents

Follow the procedure below to play back iPod/iTunes
music contents on the unit.
1
Turn on the unit, and start iTunes on the PC
or display the playback screen on the iPod.
If the iPod/iTunes recognizes the unit, the AirPlay
icon ( ) appears.
y
For iPods using iOS 7, AirPlay is displayed in Control Center. To
access Control Center, swipe up from the bottom of the screen.
Example on iTunes
Note
If the icon does not appear, check whether the unit and PC/iPod
are connected to the router properly.
The unit
Playback starts
Example on iOS6
Example on iOS7
2
On the iPod/iTunes, click (tap) the AirPlay
icon and select the unit (network name of the
unit) as the audio output device.
Example on iTunes
Network name of the unit
3
Select a song and start playback.
The unit automatically selects "AirPlay" as the input
source and starts playback. The playback information is
displayed on the front display.
y
• If you press the DISPLAY repeatedly, you can switch the
playback information on the front display (p.29).
• You can turn on the unit automatically when starting playback
on iTunes or iPod by setting "Net Standby" (p.33) in the
"Setup" menu to "On".
• You can edit the network name (the unit's name on the network)
displayed on iPod/iTunes in "Network Name" (p.34) in the
"Setup" menu.
• If you select the other input source on the unit during playback,
playback on the iPod/iTunes stops automatically.
• You can adjust the unit's volume from the iPod/iTunes during
playback.
Caution
• When you use iPod/iTunes controls to adjust volume, the
volume may be unexpectedly loud. This could result in damage
to the unit or speakers. If the volume suddenly increases during
playback, stop playback on the iPod/iTunes immediately.
Example on iOS
27
En