AWS SEAL-N-WEIGH Manual Del Usuario página 8

be accurate. Note: You cannot vacuum seal an item or use
the scale at the same time.
4. Press the SCALE button to turn on the scale. Make sure
"0" is displayed on the LCD screen. Press MODE to select
the weight mode.
5. Place the food to be weighed on the platform. It will display
its weight on the LCD screen. If you weigh the liquid or
powder foods with a container, you have to remove the
weight of the container by pressing the TARE button. (See
"TARE feature" of "PRODUCT FEATURES" )
V. Note
1. Calibration feature: Successful calibration has been
performed before shipping. Use this function only when
the reading is inaccurate. Your scale will need a 2000g
calibration weight.
2. Calibrating method: 1) Press the SCALE button to turn
the scale on. 2) When it displays "0.0g", press and hold
the MODE button until "2000.0g" appears on the display.
3) Press the MODE button again. It will display "CAL"-
"2000.0g". 4) Place a 2000g calibration weight in the
center of the platform. Wait for a few seconds. When it
displays "PASS", it indicates successful calibration.
3. Capacity: Capacity is 2kg. Do not place items beyond 2kg
on the platform. To prevent the sensor from damaging and
ensure the accuracy, place the item in the center of the
platform and do not hit the platform.
4. Operating environment: To ensure the accuracy, wait
at least 30 seconds after it is activated. Operating
temperature is 10-30 C.
0