B.Pro BC GF 3500 Manual De Instrucciones página 23

6.2 Cleaning the appliance
Drain plug
Collecting container
(capacity approx. 1.4 litres)
Drain the liquids
. Before draining, remove the collecting container to approx. 5 cm, in order to view the fill quantity
during draining.
. Drain the residue from cleaning into the collecting container. Whilst draining, use a brush and
thoroughly clean the waste pipe..
Cleaning
. Wash plug in the dishwasher or by hand using a grease-dissolving detergent.
. Remove dark spots on the surface with vinegar cleaner and stainless steel pan cleaner.
. Use water to flush the drain and then rub dry.
. Apply food quality maintenance emulsion or edible oil to the frying area. Use a kitchen towel and
uniformly distribute the maintenance emulsion or edible oil.
Clean stainless steel surfaces
. Clean stainless steel surfaces with grease-dissolving cleaner or a special stainless steel cleaner.
. Wash or rinse the cleaned surfaces thoroughly with clean water and dry with a soft cloth.
CAUTION! Hot surfaces, hot liquids!
Risk of burning! Risk of scalding if the collecting container is filled with hot liquid! Risk
of burning if touching or hot liquids spill over!
. Do not fill the collecting container too high!
. Whilst draining, check the fill level!
. Wear waterproof protective gloves!
. Exercise appropriate caution!
. Turn off appliance and let it cool down.
. Empty the collecting container and replace.
. Insert the drain plug in the drain opening.
. Pour warm water into the roasting pan. Add
rinsing agent and vinegar cleaner and clean
with a cleaning brush or with a stainless steel
pan cleaner.
Release burnt-in food
. Briefly heat the cleaning solution or allow to
boil, thereby, release the burnt-in food using a
brush.
en
23 / 80