Publicidad
2. Insert the handle into the telescopic extension tube.
3. Press the button on the telescopic extension tube and adjust to
the required length.
4. Insert the other end of the telescopic tube into the floorhead
until it clicks into place.
HOW TO USE
IMPORTANT: The motor is equipped with a thermal cut-out. If
for any reason the unit should overheat, the thermostat will
automatically turn the unit off.
5. Fully unwind the power cord. A yellow mark on the cord
indicates the recommended cord length. Do not exceed the
cord beyond the yellow mark.
6. Plug in and switch the unit on by pressing the power button.
7. Use the vacuum by moving the floorhead backwards and
forwards for an effective clean.
8. Remove the floorhead to use the hose in harder to reach
places.
EMPTYING AND CLEANER THE DIRT CONTAINER
Publicidad
