Publicidad
IMPORTANT: Always switch off and unplug the vacuum
cleaner from the electrical socket before assembling,
operating or emptying the dirt container, or before
connecting/disconnecting the attachments. The dirt container
should be emptied and cleaned regularly to allow the vacuum
to perform at its optimum suction rate.
9. Press the dirt containers release button to remove the dirt
container.
10. Hold the dirt container over a bin. Press the dirt release clip
at the bottom of the container. The dirt release door will open
allowing dirt/debris to fall out.
11. Remove the clear dust separator inside the dirt container by
twisting clockwise.
12. Twist the shroud anti-clockwise to unlock and remove from the
dirt container.
13. Tap the shroud against a bin to remove any dirt or debris.
Using a dry cloth wipe the separator and shroud clean.
NOTE: For easier cleaning, follow the 3-step clean
process located on the back of the dirt container. Don't
over fill the dirt containers. Replace the filters every 6-9
months.
CLEANING THE PRE-MOTOR FILTER
14. Twist the dirt container lid anti-clockwise and lift to remove.
15. Lift out the pre-motor filter.
16. Tap the filter over a bin to remove any dirt and debris.
17. Rinse the filter under water (40°C Max). Leave to dry for 24
hours before placing back in the machine.
Publicidad
