Publicidad
Idiomas disponibles
Idiomas disponibles
- Clean the ventilation slots regularly with a soft cleaning brush.
- Ensure that the appliance is completely dry before using it again or putting it away.
8
Scope of delivery
The package contains:
1 x Induction unit
1 x Operating instructions
9
Servicing/Maintenance
Servicing and maintenance are limited to Cleaning as described in Chapter 7.
10
Repairs
Repairs may be made by the manufacturer or an authorized technician only. If you have any questions, contact
your dealer or our customer service.
11
Troubleshooting
Disorder
The control lamp does not light up
when the power cord is connected.
The induction unit does not heat.
The appliance suddenly stops
operation.
22
Possible cause
1. No / insufficient supply voltage.
2. Internal defect.
1. The cookware is not suitable for
induction or the bottom diameter is
too small.
2. The cookware is not placed in the
middle of the glass ceramic surface.
3. The overheat protection is activated.
4. Internal defect.
1. The overheat protection is activated.
2. Internal defect
Troubleshooting
1. Plug the cord into a suitable
socket. Make sure the socket has
the correct voltage. Assure that
the appliance is switched on.
2. Contact your sales or service office.
1. Use appropriate cookware
according to chapter 5.3.
2. Pay attention to the marking on the
glass ceramic surface and place
the cookware inside the circle.
3. Allow the appliance to cool down.
4. The device is defect. Contact your
sales or service office.
1. Assure that the cookware is not
empty. Remove it carefully from
glass ceramic surface and allow
the appliance to cool down. Ensure
unobstructed air circulation.
2. Contact your sales or service office.
Publicidad
