Aquona VYRTA Direct Flow Manual De Instrucciones página 49

water for 2 hours. Turn the unit off and on again and
then press and hold the power button for 1.5 seconds.
3.2. FUNCTIONALITIES
FUNCTION
1. Flushing on the
start of the machine.
2. Daily flushing.
3. Opening the faucet
4. Tap closure.
5. Turn off the tap
after more than 4
hours after the last
use.
6. Protection for ex-
cessive working time.
ACTIONS
Whenever electrically connected the system will flush the RO membrane during
30 seconds.
When the machine has been idly operating for 24 hours, the system will wash the
membrane for 30 seconds. If the user opens the faucet, the machine will stop
flushing and goes into normal mode.
The system is put into normal operation.
The system stops producing water and goes on standby.
The system will wash the membrane for 15 seconds.
If the equipment is running for more than two hours nonstop, the overuse pro-
tection will be activated. The indicator light will be on fixed in orange. To restart
the equipment, electrically disconnect it, and then press the power button for 1.5
seconds.
49