turbionaire trend Serie Manual De Instrucciones página 14

6. REMOTE CONTROL DESCRIPTION AND ACTIVATION
The remote control is a radio transmitter designed to control the unit. Remove the
transparent pull tab from the remote-control battery compartment. Since then,
the remote control is activated and operates within a range of approximately 20
m (battery in a good functioning state).
A. FIRST OPERATION
For optimal operation, it is recommended that each device be associated with its remote control. Once powered, they start working in
(extraction - intake) mode, as indicated by the yellow light on the device.
B. PAIRING REMOTE CONTROL TO VENTILATION UNIT
To connect the unit device with the remote control, press the "RESET" button on the unit to be connected to the remote control, for at least 5
seconds. When the BLUE LED flashes, the synchronization has started. To confirm the pairing, press any button on the remote control (except
for the "ON/OFF" button). The pairing is complete. Perform the same operation on all installed units. To unpair, repeat the steps above.
14
To pair the remote control to
the device, see the
instructions.