turbionaire trend Serie Manual De Instrucciones página 18

DIMMER BUTTON
When it is pressed successively, the intensity of the LED indicator positioned on the side of the device will increase: after reaching the
maximum, the intensity restarts from the minimum (off) and increases again: after a short period of time in which DIMMER button was not
pressed, the intensity is considered set.
RESTORE TO FACTORY SETTINGS
Press the "RESET" button on the device for at least 5 seconds, when the LED flashes BLUE, release the button, then press it again the "RESET"
button until the LED indicator turns RED, and the setting from the factory is restored.
8. DEVICE STATUS LEGEND
LED DESCRIPTION
Static RED
Static YELLOW
Static GREEN
Flashing GREEN
Flashing PURPLE
Flashing BLUE
RED short flashing
Static BLUE
Flashing BLUE
18
STATUS
Unit OFF
Unit ON
AUTO MODE (Intake-Extraction)
AUTO MODE (Extraction)
Min/Max SPEED
SPEED Setting
Timer Mode
MODE (Intake-Extraction)
Extraction Mode
PERFORMANCE CHART
Airflow ( m³/h)