Publicidad
Idiomas disponibles
Idiomas disponibles
Accesso‐
ries
12.2 How to remove: Shelf
supports
Remove the shelf supports to clean the oven.
Step 1
Turn off the oven and wait until it is
cold.
Step 2
Pull the front of the shelf support
away from the side wall.
Step 3
Pull the rear end of the shelf sup‐
port away from the side wall and
remove it.
Step 4
Install the shelf supports in the op‐
posite sequence.
12.3 How to use: Pyrolysis
Clean the oven with Pyrolysis.
WARNING!
There is a risk of burns.
Turn off the oven and wait
until it is cold.
Step 1
Set the function:
Step 2
,
Clean all accessories after each use and let them dry. Use a soft cloth with warm water
and a mild detergent. Do not clean the accessories in a dishwasher.
Do not clean the non-stick accessories using abrasive cleaner or sharp-edged objects.
Before the Pyrolysis:
Remove all accessories.
.
- flashes.
- press to set the cleaning mode.
1
CAUTION!
If there are other appliances installed in
the same cabinet, do not use them at the
same time as this function. It can cause
damage to the oven.
Clean the oven floor and the inner
door glass with warm water, a soft
cloth and a mild detergent.
2
ENGLISH
25
Publicidad
