Publicidad
Idiomas disponibles
Idiomas disponibles
■
Louver lock
* The direction of the louver can be locked individually.
Carry out the setting operation while the indoor unit is stopped. (Turn off the air conditioning unit before starting the
setting operation.)
Before setting
Louver setting
1.Swing type
2.Louver lock
Return
Set
Louver lock
3
4
2
1
Return
Fix
Louver No.
27-EN
OM_1115350256-1_EN_FR_ES.indb 14
OM_1115350256-1_EN_FR_ES.indb 14
1
∧
∨
Push the [
] / [
] button to select
"3. Louver setting" on the menu screen, then
push the "
Set" [
F2] button.
Set
2
∧
∨
Push the [
] / [
] button to select
"2. Louver lock", then push the "
Set"
Set
[
F2] button.
3
Push the "
Louver No." [
F1] button
to select the louver to set.
The display changes as follows each time the button
is pushed.
Louver 1
Louver 2
Louver 3
Louver 4
All
Electrical control
box
Refrigerant pipe
Drain pipe
4
Push the [
∧
] / [
∨
] button to select the
louver (wind) direction.
Push the [
∧
] button to move the louver
upward. Push the [
∨
] button to move it
downward.
Not
(1)
(2)
(3)
(4)
(5)
locked
5
Push the [
MENU] button.
" Setting" appears on the display.
The unit selection screen appears when the group
control is used. Push the [
CANCEL] button
on the unit selection screen to finish the setting
operation. " Setting" appears on the display.
5
Operating air conditioner without remote
controller (temporary operation)
In the following cases, the air conditioner can be operate without remote controller with temporary
operation button on the signal receiving unit.
• The battery in the remote controller expired.
• A trouble occurred on the remote controller.
• The remote controller has been lost.
1
2
– 14 –
1
Start
Push temporary operation button.
• The operation mode is the one last selected.
If you want to change it, turn the power off and
then on, and push the temporary operation
button again.
2
Stop
Push temporary operation button once more.
5/4/2565 BE 09:52
5/4/2565 BE 09:52
EN
TH
ID
28-EN
Publicidad
