Toshiba Carrier RAV-SM182CTP-UL Manual Del Propietário página 13

Wind direction
– 1 – 1 – – 1 – 4
– 1 – 2 – 1 – 5
– 1 – 3 ALL
Return
Unit Set
Wind direction
1 4
– 1 – 1 – – –
– 1 – 2 – 1 – 5
– 1 – 3 ALL
Return
Unit Set
1–1 Wind direction
Return Louver
Swing ON
23-EN
01_OM_1115653833_EN.indd 12 01_OM_1115653833_EN.indd 12
1
Select the group-controlled function on the menu
screen, then push the " Set" [ F2 ]
Set
button.
2
Push the " unit" [ F1 ] button to
Unit
select the unit to set.
The selected unit changes as follows each time the
button is pushed:
1-1 1-2 1-8
3
Push the " Set" [ F2 ] button.
Set
The setting display for the selected unit appears.
4
Push the [ CANCEL] button.
Pushing the [ CANCEL] button returns to the
previous screen.
Pushing the [ CANCEL] button when setting
"Swing type" or "Louver lock" shows " Setting"
on the screen.
• The number (address) of the selected unit appears
on the upper left of the screen, unless "All" is
selected for the unit selection.
• "All" is not available for some settings.
◆ Unit select button
• When multiple indoor units are controlled with one
remote controller, wind direction can be set for each
indoor unit by selecting individually.
Horizontal air fl ow adjustment
To change the horizontal air fl ow direction, point the
vertical louvers inside the horizontal louver in your
preferred direction.
NOTE
• When the horizontal louver is pointing downward in
COOL mode, water droplets may form on the surface
of the cabinet or louver and drop down.
• When the horizontal louver is pointing horizontally
in HEAT mode, the air may not warm up the room
evenly.
– 12 –
EN
24-EN
4/4/2565 BE 11:10 4/4/2565 BE 11:10